Cisco Systems UBR-3X10 manual Sample Configuration Using One Cisco uBR 3x10 RF Switch

Chapter 3 Installing the Cisco RF Switch

Rack-Mounting the RF Switch with the Cisco uBR10012 CMTS

Cisco uBR10012 CMTS, Cisco uBR10-MC28C Cable Interface Line Cards, One RF Switch, and One Upconverter

This sample configuration shows the Cisco uBR10012 CMTS with Cisco MC28C cable interface line cards installed, one Cisco uBR 3x10 RF Switch mounted flush front, and one Vecima HD4040 series upconverter. See Figure 3-2.

Note An upconverter is required when you are using either the Cisco uBR-MC16C, E, S, line card or the Cisco uBR-MC28C line Card in this configuration.

Figure 3-2 Sample Configuration Using One Cisco uBR 3x10 RF Switch

Vecima HD4040 series

Cisco uBR 3x10 RF Switch

Cable management

bracket

Cisco uBR10012 CMTS

Flush front

62532

Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide

OL-1984-06 3-5