
Figure 6-21. Change Mode Confirmation screen
Type y and press Enter. The switch will then save the changes made during the current session and reboot. The switch must be rebooted to change the operation mode.
Menu Changes with Switch Operating Mode
Once the switch is configured for IP Routing (Layer 3 Switching), and rebooted, the Main Menu adds some functions compared to the Layer 2 Only mode. These functions are reflected in additional configuration menus (under the same Main Menu headings as in Layer 2 mode), and the addition of the Layer 3 IP Networking entry. All of the console menus are listed, in order, in the Screen Hierarchy below.
Figure 6-22. Main Menu – Layer 2 Switching Mode
This is the Main Menu when the switch is in Layer 2 mode.