The following fields can be set:
Parameter | Description |
|
| |
|
|
| ||
Action:<Add/Modify | This field can be toggled between |
| ||
> | Add/Modify and Delete using the |
| ||
| space bar. |
|
|
|
|
|
| ||
VID: [ ] | Allows the entry of the VLAN ID (VID) |
| ||
| of the VLAN to which the MAC |
| ||
| address below is a member of. |
| ||
|
|
| ||
MAC Address:[ ] | Allows the entry of a MAC address to |
| ||
| be filtered from the switch. This |
| ||
| address must be a unicast MAC |
| ||
| address. |
|
|
|
|
|
| ||
Source/Destination: | This field can be toggled using the |
| ||
<Scr.> | space bar between Src. (Source), Dst. |
| ||
| (Destination), | and | Either, |
|
| corresponding to whether the MAC |
| ||
| address entered above will be |
| ||
| transmitting | packets (a | source), |
|
| receiving packets (a destination) or |
| ||
| both (either). |
|
|
|
|
|
|
|
|
|
|
|
|
|
Layer 3 (IP Routing) Filtering
With the switch configured to Layer 3 Operation mode, both MAC and IP addresses can be entered into the filtering table, using their respective entry menus. To enter an address, highlight Filtering from the Main Menu and press Enter.
