Saving Changes
The
Some settings, though, require you to restart the switch before they will take effect. Restarting the switch erases all settings in RAM and reloads the stored settings from the
To retain any configuration changes permanently, click Save Changes on the Maintenance menu and then click Save Configuration on the following window:
Figure 7-4. Save Changes window
Once the switch configuration settings have been saved to
Reboot and Load Factory Defaults
The following window is used to restart the switch using only the configuration that was supplied by the factory. To return all configuration options to their default values and restores the switch’s configuration to the factory settings, select Factory Reset on the Maintenance menu.
Please note that all
Figure 7-5. Factory Reset to Default Value window
Check Yes if you want the switch to retain its current IP address. Check No to reset the switch’s IP address to the factory default, 10.90.90.90.
Click the Reset to Factory Default button to restart the switch.
