Figure 7-50. Filter Address Setup window
The following fields can be set:
ParameterDescription
Address <0.0.0.0> Allows the entry of an IP address to be filtered from the switch.
State <DstAddr> This field can be toggled between
SrcAddr (source), DstAddr.
(destination), and DstSrcAddr. The IP address entered into the filtering table can be filtered as a source (packets will not be received from the IP address), as a destination (packets will not be transmitted to the IP address), or as either a source or destination (packets will not be received from or transmitted to the IP address.
Forwarding
Layer 2 Forwarding
To enter a MAC address into the switch’s forwarding table:
Select Forwarding on the Configuration menu, choose MAC Forwarding, and click MAC Address Forwarding:
