DES-3326 Layer 3 Fast Ethernet Switch User’s Guide

The following fields can be set:

ParameterDescription

Interface

 

Allows the entry of the name of the IP interface for which

Name<System>

DVMRP is to be configured. This must be a previously

 

 

defined IP interface.

IP Address

 

Displays the IP address corresponding to the IP Interface

 

 

name entered above.

Probe

Interval

This field allows an entry between 0 and 65,535 seconds

<10>

 

and defines the interval between ‘probes’. The default is

 

 

10.

Nbr Report Timer

This field allows an entry between 1 and 65,535 seconds

<35>

 

and defines the time period for DVMRP will hold Neighbor

 

 

Router reports before issuing poison route messages. The

 

 

default is 35 seconds.

Route Cost <1>

This field allows an entry between 1 and 255 and defines

 

 

the route cost for the IP interface. The DVMRP route cost

 

 

is a relative number that represents the real cost of using

 

 

this route in the construction of a multicast delivery tree.

 

 

It is similar to, but not defined as, the hop count in RIP.

 

 

The default cost is 1.

State <Disabled>

This field can be toggled between Enabled and Disabled

 

 

and enables or disables DVMRP for the IP interface. The

 

 

default is Disabled.

 

 

 

PIM-DM Settings

To configure PIMDM for an IP interface:

Click the PIMDM Interface Configuration link:

Figure 7-45. PIM-DM Interface Configuration window

230

Page 230
Image 230
D-Link DES-3326 manual PIM-DM Settings, Nbr Report Timer, Route Cost, Click the Pimdm Interface Configuration link, 230