D-Link DES-3326 manual Upper Threshold for, Base ports, Module ports, 206

	DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
<Disabled>	dictate, globally, the switch’s reaction to Broadcast storms
	and/or Multicast storms, triggered at the threshold set
	below.
Upper Threshold for	This is the number of thousands Broadcast/Multicast
Base ports <128>	packets per second received by the switch – on one of the
	Master Ports – that will trigger the switch’s reaction to a
	Broadcast/Multicast storm.
Upper Threshold for	This is the number of thousands Broadcast/Multicast
Module ports <128>	packets per second received by the switch – on one of the
	module ports – that will trigger the switch’s reaction to a
	Broadcast/Multicast storm.
GVRP <Disabled>	Allows the Group VLAN Registration Protocol (GVRP) to be
	globally Enabled or Disabled on the switch.
GMRP <Disabled>	Allows the Group Multicast Registration Protocol (GMRP)
	to be globally Enabled or Disabled on the switch.

Switch Settings − Layer 3 IP Routing Protocol Settings

The Layer 3 Switch Settings menu only allows the available multicasting protocols to be enabled or disabled − globally − on the switch.

The multicasting and routing protocols are setup under the Multicasting and the Configure Layer 3 − IP Networking menus.

To access the Layer 3 IP Routing Protocol Settings window, go to the Configuration menu, select Switch Settings, and then click Layer 3 IP Routing Protocol Settings:

Figure 7-17. Layer 3 IP Routing Protocol Settings window

The following fields can then be set:

ParameterDescription

DVMRP <Disabled> Allows the Distance-Vector Multicast

Routing Protocol (DVMRP) to be

Enabled or Disabled globally on the

206