
To make a static DNS table entry:
Click the Static Setup link on the DNS Relay menu:
Figure 7-69. DNS Relay Setup window
The following fields can be set:
ParameterDescription
Domain Name The domain name of the static DNS table entry.
IP | Address The IP address of the domain name |
<0.0.0.0> | above. |
Status <Enabled> This field can be toggled using the space bar between Enabled and Disabled.
Network Monitoring
The
Network monitoring on the switch is divided into Layer 2 and Layer 3 functions, depending upon which operating mode the switch is in. Layer 2 network monitoring functions are visible on the console when the switch is in Layer 2 Only operating mode. Layer 3 network monitoring functions are added to the console when the switch is in IP Routing operating mode.
Layer 2 Network Monitoring
Layer 2 network monitoring consists of the following screens or menus:
Statistics
•Port Utilization
•Port Error
247