To configure the BOOTP/DHCP Relay interface, highlight BOOTP/DHCP Relay Interface Configuration from the BOOTP/DHCP Relay menu and press Enter.
Figure 6-86. BOOTP/DHCP Relay Interface Configuration screen
The following fields can be set:
ParameterDescription
Action:<Add> This field can be toggled between Add and Delete using the space bar. Toggle to Add and enter the subnet name for which BOOTP Relay will be active.
Interface | Name:[ | The interface name of the IP interface | |||
] |
| on which the BOOTP or DHCP | |||
|
| servers reside. |
|
| |
IP Address: |
| Displays | the | IP | address |
|
| corresponding to the subnet name | |||
|
| entered above. |
|
| |
BOOTP/DHCP | Allows the entry of IP addresses for | ||||
Server:[ | ] | up to four BOOTP or DHCP servers. | |||
|
|
|
|
|
|
DNS Relay
To enter the IP addresses of DNS servers (for the DNS Relay service):
Highlight DNS Relay on the Switch Utilities menu and press Enter.
