D-Link DES-3326 manual Baud Rate, Data Bits, Stop Bits, 203

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide

Figure 7-14. Serial Port Settings window

Use the Select Protocol pull-down menu to select either the Console or the SLIP protocol.

The following fields can then be set:

Console Settings

ParameterDescription

Baud Rate	Displays	the	serial	bit	rate	used to
	communicate		with	a	management
	station. The console baud rate is
	9600 bits per second.
Data Bits	Displays	the	number		of bits that
	make	up	a	word		when
	communicating			with		the
	management		station.		The	console
	interface uses 8 data bits.
Stop Bits	Displays the number of bits used to
	indicate that a word has been
	completely transmitted.				The console
	interface uses 1 stop bit.

Auto-LogoutThis sets the time the interface can be idle before the switch automatically logs-out the user. The options are 2 mins, 5 mins, 10 mins, 15 mins, or Never.

SLIP Settings

Parameter	Description
Baud Rate	Sets the serial bit rate that will be
	used to communicate the next time

203