To configure IGMP Snooping:
Toggle the Switch IGMP Snooping field to Enabled. Toggle the Querier State field to the appropriate choice between
10)and specifies the maximum amount of time allowed before sending a response report. Highlight APPLY and press Enter to make the settings effective.
The following fields can be set:
ParameterDescription
Switch IGMP
Snooping:
<Disabled>
Querier State:<Non-
Querier>
This field can be toggled using the space bar between Disabled and Enabled. This is used to enable or disable IGMP Snooping, globally, on the switch.
This field can be toggled between
Robustness A tuning variable to allow for
Variable:[ 2] are expected to lose a large number of packets. A value between 2 and 255 can be entered, with larger values being specified for
Query Interval:[125 Allows the entry of a value between 1 and 65535
]seconds, with a default of 125 seconds. This specifies the length of time between sending IGMP queries.
Max. Response:[10] Sets the maximum amount of time allowed before sending an IGMP response report. A value between 1 and 25 seconds can be entered, with a default of
10seconds.
IEEE 802.1Q Multicast Forwarding
To edit the IEEE802.1 Multicast Forwarding settings, highlight IEEE802.1Q Multicast Forwarding Settings from the Multicasting Menu and press Enter.
