D-Link DES-3326 manual Traffic Classification and Prioritization, Management

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide

•Hardware-based Layer 3 IP switching.

•IP packet forwarding rate of 6.6 Mpps.

•2K active IP address entry table per device.

•Supports RIP – (Routing Information Protocol) version I and II.

•Supports OSPF − (Open Shortest Path First)

•Supports MD5 and Password OSPF Packet Authentication

•Supports IP version 4.

•IGMP version 1 and 2 support (RFC 1112 and RFC 2236).

•Supports PIM Dense Mode.

•Supports DVMRP.

•Supports IP multi-netting.

•Supports IP packet de-fragmentation.

•Supports Path MTU discovery.

•Supports 802.1D frame support.

Traffic Classification and Prioritization

•Based on 802.1p priority bits

•4 priority queues

Management

•RS-232 console port for out-of-band network management via a console terminal or PC.

•Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of network loops.

•SNMP v.1 Agent.

•Fully configurable either in-band or out-of-band control via SNMP based software.

•Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the console.

•Built-in SNMP management:

Bridge MIB (RFC 1493)

MIB-II (RFC 1213)

Mini-RMON MIB (RFC 1757) – 4 groups

CIDR MIB (RFC 2096), except IP Forwarding Table.

13