Setup OSPF
Highlight Setup OSPF from the Setup Layer 3 - IP Networking menu and press Enter to access the Setup OSPF menu.
Figure 6-44. Setup OSPF menu
Each menu item is explained as follows:
•OSPF Area Setting – Allows the configuration of
•OSPF Interface Configuration – Allows the entry of OSPF Interfaces that correspond to IP interfaces defined previously on the switch.
•Virtual Interface Configuration – Allows the definition of areas that allow links with outside routers to access the OSPF backbone.
•Area Aggregation Configuration – Allows OSPF areas to be represented by their network- number (network address) and subnet mask. In addition, the type of
On the Setup OSPF menu itself, an OSPF Router ID for the switch is entered. This is a
