Figure 6-104. Monitor LSDB Table screen
The following fields are displayed:
ParameterDescription
Area ID Allows the entry of an OSPF Area ID. This Area ID will then be used to search the table, and display an entry − if there is one.
LSDB Type Displays which one of four types of link advertisements by which the current link was discovered by the switch: Router link (RTRLink), Network link (NETLink), Summary link (Summary), Autonomous System link (ASSummary).
Adv Router Displays the Advertising Router’s ID.
ID
Link State This field identifies the portion of the internet environment that is
ID being described by the advertisement. The contents of this field depend on the advertisement's LS type.
LS Type Link State ID
____________________________________________
1The originating router's Router ID.
2The IP interface address of the network's Designated Router.
3The destination network's IP address.
4The Router ID of the described AS boundary router.
Mask Displays the network mask in hexadecimal format. For example, 255.0.0.0 is displayed as FF000000.
Cost | Displays the routing metric associated with the link. |
Sequence Displays a sequence number corresponding to number of times the current link has been advertised as changed.
