servers reside on.
BOOTP/DHCP Allows the entry of IP addresses for
Server <0.0.0.0> up to four BOOTP or DHCP servers.
DNS Relay
To enter the IP addresses of DNS servers (for the DNS Relay service):
Select DNS Relay on the Configuration menu and then click DNS Relay:
Figure 7-68. DNS Relay Setups window
The following fields can be set:
Parameter | Description | |
DNS Relay | State | This field can be toggled between |
<Disabled> |
| Disabled and Enabled using the pull- |
|
| down menu, and is used to enable or |
|
| disable the DNS Relay service on the |
|
| switch. |
Primary | Name | Allows the entry of the IP address of |
Server <0.0.0.0> | a primary domain name server | |
|
| (DNS). |
Secondary | Name | Allows the entry of the IP address of |
Server <0.0.0.0> | a secondary domain name server | |
|
| (DNS). |
DNSR Relay Cache | This can be toggled between Disabled | |
Server | Status | and Enabled. This determines if a |
<Disabled> |
| DNS cache will be enabled on the |
|
| switch. |
DNS Relay Static
Table Lookup
Status <Disabled>
This field can be toggled using the
246
