Table 1-3. System Messages (continued)

Message

Causes

Corrective Actions

 

 

 

Memory set to

The memory frequency may

If not an intentional setting,

minimum

be intentionally set lower for

check any other system

frequency.

power conservation.

messages for possible causes.

 

The current memory

Ensure that your memory

 

configuration may support

configuration supports the

 

only the minimum frequency. higher frequency.

 

 

See "General Memory

 

 

Module Installation

 

 

Guidelines" on page 119.

 

 

 

Memory tests

POST memory test was

Information only.

terminated by

terminated by pressing the

 

keystroke.

spacebar.

 

 

 

 

MEMTEST lane

Invalid memory

Ensure that the memory

failure detected

configuration. Mismatched

modules are installed in a

on x

memory modules are

valid configuration.

 

installed.

See "General Memory

 

 

Module Installation

 

 

Guidelines" on page 119.

 

 

 

Mirror mode

The memory configuration

Reconfigure the memory

disabled. For

does not match the setting in

modules for Memory

mirror mode,

BIOS. The BIOS setting has

Mirroring mode. See

DIMMs must be

been disabled.

"System Memory" on

installed in

 

page 119.

pairs. Pairs must

 

 

be matched in size and geometry.

About Your System

45

Page 45
Image 45
Dell R410 owner manual Memory set to, Memory tests, Terminated by, Keystroke, Memtest lane, Failure detected, Mirror mode