Dell R410 owner manual Expansion card

5Install the expansion card:

a Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector on the expansion- card riser.

b Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated.

c Close the expansion-card latch. See Figure 3-11.

Figure 3-11. Installing or Removing an Expansion Card

3

1

2

1	expansion-card latch	2	expansion card
3	expansion-card riser

6Connect any cables to the expansion card.

7Close the system. See "Closing the System" on page 83.

8Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

98

Installing System Components