Table
Message | Causes | Corrective Actions |
|
|
|
| The Advanced ECC option | Check other messages for a |
ECC mode | was enabled in BIOS, but is | faulty memory module. |
disabled. For | no longer valid due to an | Reconfigure the memory |
unsupported memory | modules for Advanced | |
ECC, DIMMs must | configuration, possibly a | ECC mode. See "System |
be installed in | faulty or removed memory | Memory" on page 119. |
pairs. Pairs must | module. The Advanced |
|
be matched in | ECC setting has been |
|
size and | disabled. |
|
geometry. |
|
|
Alert! Advanced | Advanced ECC Memory |
ECC Memory Mode | Mode was enabled in the |
disabled! Memory | system setup program, but |
configuration | the current configuration |
does not support | does not support Advanced |
Advanced ECC | ECC Memory Mode. |
Memory Mode. | A memory module may be |
| faulty. |
Ensure that the memory modules are installed in a configuration that supports Advanced ECC Memory Mode. Check other system messages for additional information for possible causes. For memory configuration information, see "General Memory Module Installation Guidelines" on page 119. If the problem persists, see "Troubleshooting System Memory" on page 152.
Alert! iDRAC6 not The optional iDRAC6 is not
responding. | responding to BIOS |
Rebooting. | communication either |
| because it is not functioning |
| properly or has not |
| completed initialization. |
| The system will reboot. |
Wait for the system to reboot.
38
About Your System
