Table
Message | Causes | Corrective Actions |
|
|
|
Alert! Power | The system configuration | If any system components |
required exceeds | of processor(s), | were just upgraded, |
PSU wattage. | memory modules, | return the system to the |
Check PSU and | and expansion cards may | previous configuration. |
system | not be supported by the | If the system boots without |
configuration. | power supplies. | this warning, then the |
Alert! |
| replaced component(s) are |
| not supported with this | |
Continuing |
| |
| power supply. If Energy | |
system boot |
| |
| Smart power supplies are | |
accepts the risk |
| |
| installed, replace them with | |
that system may |
| |
| High Output power supplies | |
power down |
| |
| to use the components. | |
without warning. |
| |
| See "Power Supplies" on | |
|
| |
|
| page 92. |
Alert! Redundant | Memory Sparing or Memory |
memory disabled! | Mirroring was enabled in the |
Memory | system setup program, but |
configuration | the current configuration |
does not support | does not support redundant |
redundant | memory. A memory module |
memory. | may be faulty. |
Check the memory modules for failure. See "Troubleshooting System Memory" on page 152. Reset the memory setting, if appropriate. See "Using the System Setup Program and UEFI Boot Manager" on page 57.
Alert! System | An error caused the system to | Check other system |
fatal error | reboot. | messages for additional |
during previous |
| information for possible |
boot. |
| causes. |
40
About Your System
