Dell R410 E122A, E122C CPU Power, Fault. Power, Cycle AC, E122D Memory, Regulator #, DIMMs, Fan

Table 1-2. LCD Status Messages (Optional) (continued)

Code	Text	Causes	Corrective Actions
E122A	CPU # VTT	Specified processor VTT	Reseat the processor(s).
	Regulator	voltage regulator has	See "Troubleshooting the
	failure.	failed.	Microprocessors" on
	Reseat CPU.		page 160.
			If the problem persists,
			see "Getting Help" on
			page 167.
E122C	CPU Power	A power fault was	Remove AC power to the
	Fault. Power	detected when powering	system for 10 seconds and
	cycle AC.	up the processor(s).	restart the system.
			If the problem persists,
			see "Getting Help" on
			page 167.
E122D	Memory	One of the memory	Reseat the memory
	Regulator #	regulators has failed.	modules. See
	Failed. Reseat		"Troubleshooting System
	DIMMs.		Memory" on page 152.
E122E	On-board	One of the on-board	Remove AC power to the
	regulator	voltage regulators failed.	system for 10 seconds and
	failed. Call		restart the system.
	support.		If the problem persists,
			see "Getting Help" on
			page 167.
E1310	Fan ## RPM	RPM of specified fan is	See "Troubleshooting
	exceeding	outside of the intended	System Cooling
	range. Check	operating range.	Problems" on page 151.
	fan.
E1311	Fan module ##	RPM of specified fan in	See "Troubleshooting
	RPM exceeding	specified module is	System Cooling
	range. Check	outside of intended	Problems" on page 151.
	fan.	operating range.

About Your System

25