Figure 3-16. Installing or Removing an iDRAC6 Express Card (Optional)
1 | 2 |
4 
3
1 | iDRAC6 Express card | 2 | notch |
3 | clip | 4 | plastic standoff tab |
4Close the system. See "Closing the System" on page 83.
5Reconnect the system and peripherals to their power sources, and turn them on.
Removing an iDRAC6 Express Card (Optional)
WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system.
1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2Open the system. See "Opening the System" on page 82.
108
