
Removing a Hard Drive From a Hard-Drive Bracket
Remove the screws from the slide rails on the
Figure 3-8. Removing a Hard Drive From a Hard-Drive Bracket
1 | 2 |
3
4
1 | screws (4)* | 2 | hard drive |
3 | SAS/SATA screw hole | 4 |
*Screws are supplied along with the hard drives ordered from Dell.
Installing a Hard Drive Into a Hard-Drive Bracket
1Insert the hard drive into the
2Align the holes on the hard drive with the back set of holes on the
When aligned correctly, the back of the hard drive will be flush with the back of the
3Attach the four screws to secure the hard drive to the
Installing System Components
91