Dell R410 owner manual Removing a Hard Drive From a Hard-Drive Carrier

1Remove the front bezel. See "Removing and Replacing the Optional Front Bezel" on page 81.

2If a drive blank is present in the bay, remove it. See "Removing a Drive Blank" on page 84.

3Install the hot-swap hard drive.

a Press the button on the front of the drive carrier.

b Insert the hard-drive carrier into the drive bay until the carrier contacts the backplane.

c Close the handle to lock the drive in place.With the lever on the hard

drive carrier open, slide the hard drive into the drive bay until the carrier contacts the backplane (see Figure 3-5).

Removing a Hard Drive From a Hard-Drive Carrier

Remove the screws from the slide rails on the hard-drive carrier and separate the hard drive from the carrier. See Figure 3-6.

Installing System Components

87