Emerson PMPPC7448 help, iminfo, loop, moninit, DEFINITION: isdram, DEFINITION: memmap

Monitor: Other Commands

help

The help (or ?) command displays the online help. Without arguments, all commands are displayed with a short usage message for each. To obtain more detailed information for a specific command, enter the desired command as an argument.

DEFINITION: help [command …]

iminfo

The iminfo command displays the header information for an application image that is loaded into memory at address addr. Verification of the image contents (magic number, header, and payload checksums) are also performed.

DEFINITION: iminfo addr [addr …]

isdram

The isdram command displays the SDRAM configuration information (valid chip values range from 50 to 57).

DEFINITION: isdram

loop

The loop command executes an infinite loop on address range.

DEFINITION: loop [.b, .w, .l] address number_of_objects

memmap

The memmap command displays the board’s memory map layout.

DEFINITION: memmap

moninit

The moninit command resets the NVRAM and serial number, and it writes the monitor to

Flash.

DEFINITION: Initialize environment variables and serial number in NVRAM and copy the monitor from the socket to soldered Flash.

moninit <serial#>

Initialize environment variables and serial number in NVRAM but do not update the moni- tor in soldered Flash.

moninit <serial#> noburn

Initialize environment variables and serial number in NVRAM and copy the monitor from <src_address> into soldered Flash.

11-20

PmPPC7448 User’s Manual 10006757-02