2
BASIC SETUP

1. Connect the cameras

a. Connect BNC cameras to the BNC ports on the
rear pan el.

2. Connect a monitor

a. Connect a VGA cable (not included) from the VGA
port on the rear panel to the VGA port on your
monitor.
OR
b. Connect a BNC terminated cable from one of the
Video OUT ports to a TV or CCTV monitor.

3. Connect the mouse (USB or PS/2)

a. Connect the mouse to the USB mouse port on the
rear pan el.
NOTE: If using a PS/2 mouse, a USB adapter will
be required (not included).

4. Connect the Ethernet cable

a. Connect an Ethernet cable to the LAN port on the
rear panel of system; connect the other end of the
Ethernet cable to an empty LAN port on your
router or switch (not included).

5. Connect the power cable

a. Connect the power supply to the DC 12V port on
the rear panel of the system; connect the power
cable to an outlet, power strip, or surge protector.