FARGO Electronics Inc.
2.9.8 Incomplete Transfer
Symptom: Printed image has ragged edges; HDP Film seems to have peeled off.
∙Increase the Transfer Temperature setting within the Image Transfer tab of the printer driver as described in Section 3.2.2.
∙Increase the Transfer Temperature through the LCD as described in Section 7.3.8.
∙Ensure that the Lamination Roller makes uniform contact with the card. Confirm that the Lamination Roller moves up and down freely and that the Thermocouple wire does not restrict movement.
∙If incomplete transfer is limited to the leading edge, the Transfer Tension is set too high. Decrease the Transfer Tension through the LCD as described in Section 7.3.2.
∙If incomplete transfer is limited to the trailing edge, the Transfer Tension is set too low. Increase the Transfer Tension through the LCD as described in Section 7.3.2.
HDP700 Series Card Printer |
