FARGO electronic HDP700 manual Image Transfer Tab

2.9	Diagnosing Image Problems		2-14
	2.9.1	Pixel Failure	2-14
	2.9.2	Card Surface Debris	2-14
	2.9.3	Incorrect Image Darkness	2-15
	2.9.4	Ribbon Wrinkle	2-16
	2.9.5	Excessive Resin Printing	2-17
	2.9.6	Incomplete Resin Printing	2-17
	2.9.7	HDP Film Wrinkle	2-18
	2.9.8	Incomplete Transfer	2-19
	2.9.9	Image Placement	2-20
	2.9.10	Poor Image Quality	2-21
	2.9.11	Image Washout on Film	2-21
	2.9.12	Registration problems	2-22
	2.9.13	Image Skewed on the Card	2-22
PRINTER ADJUSTMENTS			3-1
Safety Messages			3-1
3.1	Fine Tuning the Card Separator Adjustment Assembly		3-2
3.2	Using FARGO HDP Technology to Print on Alternate Card Stocks		3-2
3.3	Device Options Tab		3-5
	3.3.1	Ribbon Type	3-5
	3.3.2	Color Matching	3-5
	3.3.3	Resin Dither	3-6
	3.3.4	Print Both Sides	3-6
	3.3.5	Split 1 Set of Ribbon Panels	3-6
	3.3.6	Print Back Side Only	3-6
	3.3.7	Rotate Front 180 Degrees	3-6
	3.3.8	Rotate Back 180 Degrees	3-6
	3.3.9	Disable Printing	3-6
	3.3.10	Buffer Single Card	3-6
3.4	Image Color Tab		3-7
3.5	Image Transfer Tab		3-8
	3.5.1	Image Position	3-8
	3.5.2	Transfer Dwell Time and Temperature	3-9
	3.5.3	Flattener Temperature	3-9
3.6	K Panel Resin Tab		3-10
	3.6.1	Defining an Area	3-12
3.7	Magnetic Encoding		3-15
	3.7.1	Overview	3-15
	3.7.2	Encoding Mode/ Coercivity/ Magnetic Track Selection	3-15
	3.7.3	Magnetic Track Options	3-16
	3.7.4	Verification	3-16
	3.7.5	Shift Data Left	3-16
	3.7.6	ISO Track Locations	3-16
	3.7.7	Sending Track Information	3-17
3.8	Card Tab		3-19
	3.8.1	Card Size	3-19
	3.8.2	Card Type	3-19
	3.8.3	Orientation	3-20
	3.8.4	Copies	3-20
	3.8.5	Test Print	3-20
	3.8.6	About	3-20
3.9	Cleaning the Printer		3-20
	3.9.1	Cleaning the Printhead	3-20