FARGO electronic HDP700 manual Card Output Hopper Cover, Back Cover

FARGO Electronics Inc.

4.1.6 Card Output Hopper Cover

Refer To Drawing 840155

Tools Needed

Phillips-head Screwdriver

1.Turn off the printer and unplug the power cord from the printer.

2.Remove the six screws from the bottom edge of the Card Input Hopper Cover and the three screws from the inside edge of the cover (on the right side) of the printer.

3.Lift the Card Output Hopper Cover off of the printer.

4.1.7Back Cover

Refer To Drawing 840161

Tools Needed

Phillips-head Screwdriver

1.Turn off the printer and unplug the power cord from the printer.

2.Remove the five screws from the Back Cover of the printer.

3.Tilt the Back Cover outwards from the printer.

HDP700 Series Card Printer 4-5