FARGO electronic HDP700 Print Test Image, Gray/Align Ymck for HDP710 Gray/Align YMC/K for HDP720

FARGO Electronics Inc.

7.2Print Test Image

Choose PRINT TEST IMAGE to select a preset test image. These images help to determine if the printer is functioning properly. Scroll to the desired test image from the SELECT TEST IMAGE options and press the SELECT.

Figure 7-5

Figure 7-6

Figure 7-7

Figure 7-8

Gray/Align YMCK for HDP710 Gray/Align YMC/K for HDP720

This card is used to determine image placement and confirm that the printer is working properly. The image consists of sixteen grayscale boxes and alignment arrows. Refer to Section

7.3for adjusting image placement. Although the boxes are gray, they are composed from a composite of YMC color panels.

Color/Resin YMCK

This card is used to determine image placement and confirm that image colors are properly reproduced and the resin panel is printing properly. Image consists of twelve spot colors, YMC and RGB, as well as gray density bars and thin resin lines.

Color Bars YMC

This card is used to confirm that image colors are properly reproduced. Image consists of sixteen graduated steps of RGB and YMCK. This print will provide maximum image size, giving complete card coverage on a CR-80 sized card.

Card Count

This card is used to view counts for Card Count (CC), Pass Count (PC), and Transfer Count (TC).

Card Count is the total number of cards the printer has produced. Pass Count is the total number of print passes made by the Printhead; a pass is measured each time a single ribbon panel is printed or passes beneath the Printhead. Transfer Count is the total number of times the printer transfers an image to a card.

HDP700 Series Card Printer A-3