FARGO electronic manual HDP700 Series Card Printer

FARGO Electronics Inc.

Figure 3-13

Figure 3-14

To define another area, click on the Defined Area up arrow. Another .2" x .2" (5mm x 5mm) area will appear in the lower left-hand corner. See Figure 3-15. This is the location in which all newly defined areas will first appear. Up to 5 areas can be defined. Additional areas cannot be added until the most recently created area has been moved or sized. For this reason, size and position each area as it is created. Use the Defined Area arrows to navigate back and forth from area to area. The active area will always be highlighted with a dotted outline. To delete an area, use the Defined Area arrows to select the area, and click on the Delete button. If all areas are deleted, the K Panel Resin options will automatically be deselected.

HDP700 Series Card Printer 3-13