FARGO electronic HDP700 manual Panel Resin Tab

FARGO Electronics Inc.

3.6 K Panel Resin Tab

Figure 3-7

This option controls where the resin black (K) panel of a full-color ribbon is printed. Note that if printing with a ribbon type that does not have a K panel, such as the YMC ribbon type, all K Panel Resin options will be grayed out. Resin black text is desirable due to its sharp, saturated color, and resin black barcodes are required to ensure readability when scanned by an infrared barcode reader.

The printer driver will automatically print all TrueType black text and TrueType barcodes only with the resin black (K) panel of the print ribbon by default.

If printing black text or barcodes that are not TrueType fonts or black graphics, select one of the three options listed under "Print All Black With K Panel." See Figure 3-7. The printer driver will print areas of the image where it finds black coloring with the print ribbon's resin black (K) panel as specified by each of the following options:

1.Select the Full Card option to print the resin black (K) panel for all black found within all areas of the image. See Figure 3-8.

Figure 3-8

3-10 HDP700 Series Card Printer