Honeywell 3.5, ZyAIR G-3000 Programming for 4100SM, Programming for Access Control, Step, Action

Section 4 – Programming

Programming for 4100SM

•1✳40 & 1✳41 Date and Time Set Report Codes

•1✳70 Event Log Types (1=enable; 0=disable

•1✳71 12/24-Hour Time Stamp (0=12 hr; 1=24 hr)

Programming for Access Control

A user can trigger an access point (i.e., door strike) for 2 seconds by entering User Code + [0].

To program the VISTA-40 for access control, perform the following steps:

Step

1

Action

Enter Relay Programming in the #93 Menu Mode.

2

3

Program the relay type as 1, or 2.

For type 1, program the ECP address and relay number.

4

5

For type 2, program the house and unit codes.

Program the relay number in field 1∗76 (partition-specific).

See Relay Programming in the Programming Guide for a detailed explanation.

4-7