HP 50g Graphing manual Domain, Dosubs, List List n « program » Results Command Name List n+1

Input/Output:

		Ln+2/A1 ... L3/An–2		L2/An+1	L1/An+2		Level 1/Item 1
		{ list }1	... { list }n	n	« program »	→	{ results }
		{ list }1	... { list }n	n	command	→	{ results }
		{ list }1	... { list }n	n	name	→	{ results }
		{ list }1 ...		{ list }n+1	« program »	→	{ results }
		{ list }1 ...		{ list }n+1	command	→	{ results }
		{ list }1 ...		{ list }n+1	name	→	{ results }
			L = Level; A = Argument
Example:	{ 1 2 3 } { 4 5 6 } { 7 8 9 } 3 « + * » DOLIST returns
	{ 11 26 45 }.
See also:	DOSUBS, ENDSUB, NSUB, STREAM
DOMAIN
Type:	Command

Description: For a function of the current variable, lists the domains of real numbers for which the function is defined and for which it is undefined. DOMAIN works for functions of more than one argument, for example DOMAIN (X*X), and for user defined functions, as in the example below. For functions which it does not recognize, DOMAIN returns the message “Unknown operator”.

Access:	Catalog, …µ
Input:	Level 1/Item 1: A function, or an expression, in terms of the current variable.
Output:	Level 1/Item 1: A list with regions where the function is undefined marked by '?' and regions
	where the function is defined marked by +. Rational singularities, such as 0 in 1/x, are not listed.
Flags:	Exact mode must be set (flag –105 clear).
	Numeric mode must not be set (flag –3 clear).
Example:	Define a function f =√(a+1) by typing DEF(F(A)=√(A+1)). Then tabulate the domain over which
	it is defined and undefined.
Command:	DOMAIN(F(X))
Result:	{' ∞' '?' –1 + '+∞'}, showing that the function f is undefined for values from –∞ to –1 and is
	defined from –1 to +∞.
See also:	SIGNTAB, TABVAR
DOSUBS	Command
Type:
Description:	Do to Sublist Command: Applies a program or command to groups of elements in a list.
	The real number n can be omitted when the first argument is one of the following:
	•	A command.
	•	A user program containing a single command.
	•	A program with a userdefined function structure.
	•	A global or local name that refers to one of the above.

The first iteration uses elements 1 through n from the list; the second iteration uses elements 2 through n + 1; and so on. In general, the mth iteration uses the elements from the list corresponding to positions m through m + n – 1.

During an iteration, the position of the first element used in that iteration is available to the user using the command NSUB, and the number of groups of elements is available using the

366 Full Command and Function Reference