HP 48gII Graphing, 50g Graphing manual 603

	System Flags (continued)
Flag	Description
–65	Multi-line Mode.
	Clear: Displays all levels over multiple lines.
	Set: Displays only the first level over multiple lines.
	Depends on flag –52.
–66	Multi-line Strings.
	Clear: Displays long strings in multiple lines.
	Set: Displays long strings in single lines.
	Depends on flags –52 and –65.
–67	Digital Clock.
	Clear: When the clock is displayed (see flag –40), it is digital-style.
	Set: When the clock is displayed (see flag –40), it is analog-style.
–68	Auto-indenting.
	Clear: Command line does not automatically indent, like the HP 48GX.
	Set: Command line automatically indents.
–69	Full-screen Editing.
	Clear: The cursor cannot move out of the text line, like the HP 48GX.
	Set: Full-screen editing allowed.
–70	Multi-line Text Grobs.
	Clear: →GROB can accept only single-line strings. Newlines are turned into
	blobs.
	Set: →GROB can accept multi-line strings.
–71	Disassembler Addresses.
	Clear: Disassembler shows (non-re-assemblable) addresses.
	Set: Disassembler does not show addresses.
–72	Stack Font.
	Clear: The stack display uses the current system font.
	Set: The stack display uses mini-font.
–73	Command Line Font.
	Clear: Command line editing uses the current system font.
	Set: Command line editing uses mini-font.
–74	Stack Setting.
	Clear: The stack is right-justified, like the HP 48GX calculator.
	Set: The stack is left-justified.
–75	Keystroke Beep.
	Clear: Silent keyboard.
	Set: Key click activated if flag –56 is clear.
–76	File Manager Purge Confirmation.
	Clear: File Manager purges need confirmation.
	Set: No purge confirmation in File Manager.
–77	Not used. (Originally intended to be a filer confirmation flag in the HP 49G,
	though it was never implemented.)
–78	I/O Device for wire. Used only when flag –33 is clear, and only on the HP 50g
	and 48gII.
	Clear: I/O directed to USB port.
	Set: I/O directed to serial port.

System Flags C-5