HP 48gII Graphing, 50g Graphing manual Plotadd, Pmax, Pmin

Flags: I/O Device (–33), I/O Messages (–39), I/O Device for Wire (–78). The I/O Data Format flag (– 35) can be significant if the server sends back more than one packet.

Input/Output:

		Level 2/Argument 1	Level 1/Argument 2		Level 1/Item 1
		“data”	“type”	→	“response”
Example 1:	A PKT command to send a generic directory request is "D" "G" PKT.
Example 2:	To send a host command packet, use a command from the server’s operating system for the data
	string and "C" for the type string. For example, "'ABC' PURGE" "C" PKT on a local
	calculator would instructor a server calculator to purge variable ABC.
See also:	CLOSEIO, KERRM, SERVER

PLOT

Type:	Command
Description:	Stores its argument in EQ and opens the PLOT SETUP screen.
Access:	PGRAPH PLOT
Input:	An expression.
Output:	The input expression.
Example:	Store SIN(X) in EQ and open the PLOT SETUP screen:
Command:	PLOT(SIN(X))
Result:	PLOT SETUP screen is open with SIN(X) in EQ. SIN(X) is copied to history (LASTARG in RPN
	mode).
See also:	PLOTADD

PLOTADD

Type:	Function
Description:	Adds a function to the existing plot function list, and opens the Plot Setup screen.
Access:	PGRAPH PLOTA
Input/Output:
		Level 1/Argument 1	Level 1/Item 1
		(symb)	→
PMAX	Command
Type:
Description:	PICT Maximum Command: Specifies (x, y) as the coordinates at the upper right corner of the
	display.
	The complex number (x, y) is stored as the second element in the reserved variable PPAR.
Access:	…µPMAX
Input/Output:
		Level 1/Argument 1	Level 1/Item 1
		(x,y)	→
See also:	PDIM, PMIN, XRNG, YRNG
PMIN	Command
Type:

Description: PICT Minimum Command: Specifies (x, y) as the coordinates at the lower left corner of the display. The complex number (x, y) is stored as the first element in the reserved variable PPAR.

Full Command and Function Reference 3171