HP 48gII Graphing manual Rpl, Rl, Rlb, Rrb, Access … ÃL Byte RRB Is the rightshift of the 3key

RPL>

Type:	Command
Description:	User RPL program function. This function allows for the entry and execution of User RPL
	programs while in algebraic mode. While RPL programs can be written in algebraic mode without
	the use of this function, some RPL constructs, such as FOR…NEXT loops, will produce an error
	message if not preceded by the RPL> function. As an algebraic function, it will be placed on the
	command line with a pair of parentheses attached, which must be removed before its use.
	For example, to enter the user RPL program of « 1 5 + » in algebraic mode, choose the
	RPL> function from the catalog and press `. Remove the parentheses by pressing ™ƒƒ.
	Then enter the program by pressing …Å1#5#+`. The program object will
	now be on the first command line. It can be evaluated by pressing N!Î`.
Access:	… µRPL>
Input/Output:
		Level 1/Argument 1		Level 1/Item 1
			→	obj
RR	Command
Type:
Description:	Rotate Right Command: Rotates a binary integer one bit to the right.
	The rightmost bit of #n1 becomes the leftmost bit of #n2.
Access:	…ÃLBIT RR		(Ã is the rightshift of the	3key).
	!´BASE LBIT RR		( ´is the leftshift of the	Pkey).
	!Ú BASE LBIT RR		( Ú is the leftshift of the	6key).
Flags:	Binary Integer Wordsize (–5 through –10), Binary Integer Base (–11, –12)
Input/Output:
		Level 1/Argument 1		Level 1/Item 1
		#n1	→	#n2
See also:	RL, RLB, RRB
RRB	Command
Type:
Description:	Rotate Right Byte Command: Rotates a binary integer one byte to the right.

The rightmost byte of #n1 becomes the leftmost byte of #n2. RRB is equivalent to doing RR eight times.

Access: …ÃLBYTE RRB	(Ã is the rightshift of the 3key).
!´BASE LBYTE RRB	( ´is the leftshift of the Pkey).
!Ú BASE LBYTE RRB	( Ú is the leftshift of the 6key).

Flags: Binary Integer Wordsize (–5 through –10), Binary Integer Base (–11, –12)

Input/Output:

Level 1/Argument 1		Level 1/Item 1
#n1	→	#n2

See also: RL, RLB, RR

Full Command and Function Reference 3209