HP 48gII Graphing, 50g Graphing manual Doerr, Dolist, Error

Input/Output:

		Level 1/Argument 1	Level 1/Item 1
		DO	→
		UNTIL	→
		END	T/F →
Example:	The following program counts down from 100 to 0 and leaves the integers 100 to 0 on the stack:

«100 'A' STO A DO 'A' DECR UNTIL 'A==0' END 'A' PURGE »

See also: END, UNTIL, WHILE

DOERR

Type: Command

Description: Do Error Command: Executes a “userspecified” erro r, causing a program to behave exactly as if a normal error had occurred during program execution.

DOERR causes a program to behave exactly as if a normal error has occurred during program execution. The error message depends on the argument provided to DOERR:

• nerror or #nerror display the corresponding builtin error message.

• "error" displays the contents of the string. (A subsequent execution of ERRM returns "error". ERRN returns # 70000h.)

• 0 abandons program execution with an ‘interrupted’ error message (ERRN = #13Fh).

• 0 DOERR is equivalent to pressing −.

Access:	!°LLERROR DOERR		( °is the leftshift of the Nkey).
Input/Output:
		Level 1/Argument 1	Level 1/Item 1
		nerror	→
		#nerror	→
		“error”	→
		0	→
	The following
Example:		program takes a number from the stack and returns an error if the number is
	greater than 10:

«→ X « CASE 'X>10' THEN "X IS TOO BIG" DOERR END END » »

See also: ERRM, ERRN, ERR0

DOLIST

Type:	Command
Description:	Do to List Command: Applies commands, programs, or userdefined functions to lists.
	The number of lists, n, can be omitted when the first or level 1 argument is any of the following:
	•	A command.
	•	A program containing exactly one command (e.g. « DUP »)
	•	A program conforming to the structure of a userdef ined function.
	The final argument 1 (or level 1 object) can be a local or global name that refers to a program or
	command.
	All lists must be the same length l. The program is executed l times: on the ith iteration, n objects
	each taken from the ith position in each list are entered on the stack in the same order as in their
	original lists, and the program is executed. The results from each execution are left on the stack.
	After the final iteration, any new results are combined into a single list.
Access:	!°LIST PROCEDURES DOLIST ( °is the leftshift of the Nkey).

Full Command and Function Reference 365