Installation and Getting Started Guide
2.Click on the plus sign next to Configure in the tree view to display the configuration options.
3.Select the STP link to display the STP bridge and port parameters.
4.Click the Modify button in the STP port parameters table to display the STP configuration panel, as shown in the following example. If the device has multiple
5.Select the port (and slot if applicable) from the Port and Slot pulldown lists.
6.Enter the desired changes to the priority and path cost fields.
7.Click Apply STP Port to apply the changes to only the selected port or select Apply To All Ports to apply the changes to all the ports.
NOTE: If you want to save the priority and path costs of one port to all other ports on the device or within the selected VLAN, you can click the Apply To All Ports button.
8.Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change to the
5 - 6