Advanced Configuration and Management Guide

Link State Database Approaching Overflow Trap: Enabled

OSPF Area currently defined:

Area-ID

Area-Type

Cost

0

normal

0

OSPF Interfaces currently defined: Ethernet Interface: 3/1-3/2

ip ospf md5-authentication-key-activation-wait-time 300 ip ospf cost 0

ip ospf area 0

Ethernet Interface: v1

ip ospf md5-authentication-key-activation-wait-time 300 ip ospf cost 0

ip ospf area 0

Syntax: show ip ospf config

USING THE WEB MANAGEMENT INTERFACE

1.Log on to the device using a valid user name and password for read-only or read-write access. The System configuration panel is displayed.

2.Click on the plus sign next to Configure in the tree view to expand the list of configuration options.

3.Click on the plus sign next to OSPF in the tree view to expand the list of OSPF option links.

4.Click on the General link to display the OSPF configuration panel.

Displaying OSPF Area Information

To display global OSPF area information for the routing switch, use one of the following methods.

USING THE CLI

To display OSPF area information, enter the following command at any CLI level:

HP9300> show ip ospf area

Indx Area

Type

Cost

SPFR ABR ASBR LSA Chksum(Hex)

1

0.0.0.0

normal

0

1

0

0

1

0000781f

2

192.147.60.0

normal

0

1

0

0

1

0000fee6

3

192.147.80.0

stub

1

1

0

0

2

000181cd

Syntax: show ip ospf area [<area-id>] [<num>]

The <area-id> parameter shows information for the specified area.

The <num> parameter displays the entry that corresponds to the entry number you enter. The entry number identifies the entry’s position in the area table.

This display shows the following information.

 

Table 8.2: CLI Display of OSPF Area Information

 

 

 

This Field...

 

Displays...

 

 

 

Indx

 

The row number of the entry in the routing switch’s OSPF area table.

 

 

 

Area

 

The area number.

 

 

 

8 - 40