Installation and Getting Started Guide

Table 6.17: CLI Display of IP Traffic Statistics – routing switch (Continued)

This Field...

Displays...

 

 

out segments

The number of TCP segments sent by the device.

 

 

retransmission

The number of segments that this device retransmitted because the

 

retransmission timer for the segment had expired before the device at

 

the other end of the connection had acknowledged receipt of the

 

segment.

 

 

RIP statistics

 

The RIP statistics are derived from RFC 1058, “Routing Information Protocol”.

requests sent

The number of requests this device has sent to another RIP router for

 

all or part of its RIP routing table.

 

 

requests received

The number of requests this device has received from another RIP

 

router for all or part of this device’s RIP routing table.

 

 

responses sent

The number of responses this device has sent to another RIP router’s

 

request for all or part of this device’s RIP routing table.

 

 

responses received

The number of responses this device has received to requests for all

 

or part of another RIP router’s routing table.

 

 

unrecognized

This information is used by HP customer support.

 

 

bad version

The number of RIP packets dropped by the device because the RIP

 

version was either invalid or is not supported by this device.

 

 

bad addr family

The number of RIP packets dropped because the value in the

 

Address Family Identifier field of the packet’s header was invalid.

 

 

bad req format

The number of RIP request packets this router dropped because the

 

format was bad.

 

 

bad metrics

This information is used by HP customer support.

 

 

bad resp format

The number of responses to RIP request packets this router dropped

 

because the format was bad.

 

 

resp not from rip port

This information is used by HP customer support.

 

 

resp from loopback

The number of RIP responses received from loopback interfaces.

 

 

packets rejected

This information is used by HP customer support.

 

 

USING THE WEB MANAGEMENT INTERFACE

To display IP traffic statistics:

1.Log on to the device using a valid user name and password for read-only or read-write access. The System configuration panel is displayed.

2.Click on the plus sign next to Monitor in the tree view to list the monitoring options.

3.Click on the plus sign next to IP to list the IP monitoring options.

4.Click on the Traffic link to display the table.

6 - 96