Configuring OSPF

7.Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change to the startup-config file on the device’s flash memory.

Displaying OSPF Information

You can use CLI commands and Web management options to display the following OSPF information:

•Trap, area, and interface information – see “Displaying General OSPF Configuration Information” on page 8­ 39.

•Area information – see “Displaying OSPF Area Information” on page 8-40.

•Neighbor information – see “Displaying OSPF Neighbor Information” on page 8-41.

•Interface information – see “Displaying OSPF Interface Information” on page 8-43.

•Route information – see “Displaying OSPF Route Information” on page 8-43.

•External link state information – see “Displaying OSPF External Link State Information” on page 8-45.

•Link state information – see “Displaying OSPF Link State Information” on page 8-46.

•Virtual Neighbor information – see “Displaying OSPF Virtual Neighbor Information” on page 8-47.

•Virtual Link information – see “Displaying OSPF Virtual Link Information” on page 8-47.

•ABR and ASBR information – see “Displaying OSPF ABR and ASBR Information” on page 8-48.

•Trap state information – see “Displaying OSPF Trap Status” on page 8-48.

Displaying General OSPF Configuration Information

To display general OSPF configuration information, enter the following command at any CLI level:

HP9300> show ip ospf config

Router OSPF: Enabled

Redistribution: Disabled

Default OSPF Metric: 10

OSPF Redistribution Metric: Type2

OSPF External LSA

Limit: 25000

 

OSPF Database Overflow Interval: 0

 

RFC 1583 Compatibility: Enabled

 

Router id: 207.95.11.128

 

Interface State Change Trap:

Enabled

Virtual Interface

State Change Trap:

Enabled

Neighbor State Change Trap:

Enabled

Virtual Neighbor State Change Trap:

Enabled

Interface Configuration Error Trap:

Enabled

Virtual Interface

Configuration Error Trap:

Enabled

Interface Authentication Failure Trap:

Enabled

Virtual Interface

Authentication Failure Trap:

Enabled

Interface Receive

Bad Packet Trap:

Enabled

Virtual Interface

Receive Bad Packet Trap:

Enabled

Interface Retransmit Packet Trap:

Enabled

Virtual Interface

Retransmit Packet Trap:

Enabled

Originate LSA Trap:

Enabled

Originate MaxAge LSA Trap:

Enabled

Link State Database Overflow Trap:

Enabled

8 - 39