Installation and Getting Started Guide

TCP Statistics

0 active opens, 0 passive opens, 0 failed attempts

0 active resets, 0 passive resets, 0 input errors

138 in segments, 141 out segments, 4 retransmission

RIP Statistics

0 requests sent, 0 requests received

0 responses sent, 0 responses received

0 unrecognized, 0 bad version, 0 bad addr family, 0 bad req format 0 bad metrics, 0 bad resp format, 0 resp not from rip port

0 resp from loopback, 0 packets rejected

The show ip traffic command displays the following information.

 

Table 6.17: CLI Display of IP Traffic Statistics – routing switch

 

 

 

This Field...

 

Displays...

 

 

 

IP statistics

 

 

 

 

 

received

 

The total number of IP packets received by the device.

 

 

 

sent

 

The total number of IP packets originated and sent by the device.

 

 

 

forwarded

 

The total number of IP packets received by the device and forwarded

 

 

to other devices.

 

 

 

filtered

 

The total number of IP packets filtered by the device.

 

 

 

fragmented

 

The total number of IP packets fragmented by this device to

 

 

accommodate the MTU of this device or of another device.

 

 

 

reassembled

 

The total number of fragmented IP packets that this device re­

 

 

assembled.

 

 

 

bad header

 

The number of IP packets dropped by the device due to a bad packet

 

 

header.

 

 

 

no route

 

The number of packets dropped by the device because there was no

 

 

route.

 

 

 

unknown proto

 

The number of packets dropped by the device because the value in

 

 

the Protocol field of the packet header is unrecognized by this device.

 

 

 

no buffer

 

This information is used by HP customer support.

 

 

 

other errors

 

The number of packets that this device dropped due to error types

 

 

other than the types listed above.

 

 

 

ICMP statistics

 

 

The ICMP statistics are derived from RFC 792, “Internet Control Message Protocol”, RFC 950, “Internet Standard Subnetting Procedure”, and RFC 1256, “ICMP Router Discovery Messages”. Statistics are organized into Sent and Received. The field descriptions below apply to each.

 

total

The total number of ICMP messages sent or received by the device.

 

 

 

 

 

 

errors

This information is used by HP customer support.

 

 

 

 

 

 

unreachable

The number of Destination Unreachable messages sent or received

 

 

 

by the device.

 

 

 

 

 

 

time exceed

The number of Time Exceeded messages sent or received by the

 

 

 

device.

 

 

 

 

 

 

 

 

 

6 - 94