Configuring VRRP and VRRPE

rxed vrrp port mismatch count = 0

rxed vrrp ip address mismatch count = 0 rxed vrrp hello interval mismatch count = 0 rxed vrrp priority zero from master count = 0 rxed vrrp higher priority count = 0 transitioned to master state count = 1 transitioned to backup state count = 1

The same statistics are listed for VRRP and VRRPE.

Syntax: show ip vrrp brief ethernet <portnum> ve <num> stat

Syntax: show ip vrrp-extended brief ethernet <portnum> ve <num> stat

The brief parameter displays summary information. See “Displaying Summary Information” on page 12-19.

The ethernet <portnum> parameter specifies an Ethernet port. If you use this parameter, the command displays detailed VRRP or VRRPE information only for the specified port. See “Displaying Detailed Information” on page 12-21.

The ve <num> parameter specifies a virtual interface. If you use this parameter, the command displays detailed VRRP or VRRPE information only for the specified virtual interface. See “Displaying Detailed Information” on page 12-21.

The stat parameter displays statistics. This parameter is required for displaying the statistics.

This display shows the following information.

Table 12.5: CLI Display of VRRP or VRRPE Statistics

This Field...

Displays...

 

 

Interface Statistics

 

 

 

Interface

The interface on which VRRP or VRRPE is configured. If VRRP or

 

VRRPE is configured on more than one interface, the display lists the

 

statistics separately for each interface.

 

 

rxed vrrp header error count

The number of VRRP or VRRPE packets received by the interface

 

that had a header error.

 

 

rxed vrrp auth error count

The number of VRRP or VRRPE packets received by the interface

 

that had an authentication error.

 

 

rxed vrrp auth passwd mismatch error

The number of VRRP or VRRPE packets received by the interface

count

that had a password value that does not match the password used by

 

the interface for authentication.

 

 

rxed vrrp vrid not found error count

The number of VRRP or VRRPE packets received by the interface

 

that contained a VRID that is not configured on this interface.

 

 

VRID Statistics

 

 

 

rxed arp packet drop count

The number of ARP packets addressed to the VRID that were

 

dropped.

 

 

rxed ip packet drop count

The number of IP packets addressed to the VRID that were dropped.

 

 

rxed vrrp port mismatch count

The number of packets received that did not match the configuration

 

for the receiving interface.

 

 

rxed vrrp ip address mismatch count

The number of packets received that did not match the configured IP

 

addresses.

 

 

12 - 27