Advanced Configuration and Management Guide

Displaying OSPF ABR and ASBR Information

To display OSPF ABR and ASBR information for the routing switch, use one of the following methods.

USING THE CLI

To display OSPF ABR and ASBR information, enter the following command at any CLI level:

HP9300> show ip ospf border-routers

Syntax: show ip ospf border-routers [<ip-addr>]

The <ip-addr> parameter displays the ABR and ASBR entries for the specified IP address.

USING THE WEB MANAGEMENT INTERFACE

1.Log on to the device using a valid user name and password for read-only or read-write access. The System configuration panel is displayed.

2.Click on the plus sign next to Monitor in the tree view to expand the list of monitoring options.

3.Click on the plus sign next to OSPF in the tree view to expand the list of OSPF option links.

4.Click on the ABR ASBR Routers link.

Displaying OSPF Trap Status

To display the state (enabled or disabled) of the OSPF traps, use one of the following methods.

All traps are enabled by default when you enable OSPF. To disable or re-enable an OSPF trap, see “Modify OSPF Traps Generated” on page 8-35.

USING THE CLI

To display the state of each OSPF trap, enter the following command at any CLI level:

HP9300> show ip ospf trap

 

Interface State Change Trap:

Enabled

Virtual Interface State Change Trap:

Enabled

Neighbor State Change Trap:

Enabled

Virtual Neighbor State Change Trap:

Enabled

Interface Configuration Error Trap:

Enabled

Virtual Interface Configuration Error Trap:

Enabled

Interface Authentication Failure Trap:

Enabled

Virtual Interface Authentication Failure Trap:

Enabled

Interface Receive Bad Packet Trap:

Enabled

Virtual Interface Receive Bad Packet Trap:

Enabled

Interface Retransmit Packet Trap:

Enabled

Virtual Interface Retransmit Packet Trap:

Enabled

Originate LSA Trap:

Enabled

Originate MaxAge LSA Trap:

Enabled

Link State Database Overflow Trap:

Enabled

Link State Database Approaching Overflow Trap:

Enabled

Syntax: show ip ospf trap

USING THE WEB MANAGEMENT INTERFACE

1.Log on to the device using a valid user name and password for read-only or read-write access. The System configuration panel is displayed.

2.Click on the plus sign next to Configure in the tree view to expand the list of configuration options.

3.Click on the plus sign next to OSPF in the tree view to expand the list of OSPF option links.

4.Click on the Trap link to display the OSPF Trap panel.

8 - 48