Installation and Getting Started Guide

Displaying IP Information – HP 6208M-SX

You can display the following IP configuration information statistics on the HP 6208M-SX:

•Global IP settings – see “Displaying Global IP Configuration Information” on page 6-100.

•ARP entries – see “Displaying ARP Entries” on page 6-101.

•IP traffic statistics – see “Displaying IP Traffic Statistics” on page 6-102.

Displaying Global IP Configuration Information

To display the switch’s IP address and default gateway, use either of the following methods.

USING THE CLI

To display the IP configuration, enter the following command from any level of the CLI:

HP6208(config)# show ip

Switch IP address: 192.168.1.2

Subnet mask: 255.255.255.0

Default router address: 192.168.1.1

TFTP server address: None

Configuration filename: None

Image filename: None

Syntax: show ip

This display shows the following information.

Table 6.19: CLI Display of Global IP Configuration Information – switch

This Field...

Displays...

 

 

IP configuration

 

 

 

Switch IP address

The management IP address you configured on the switch. Specify

 

this address for Telnet or Web management access.

 

 

Subnet mask

The sub-net mask for the management IP address.

 

 

Default router address

The address of the default gateway, if you specified one.

 

 

Most recent TFTP access

 

 

 

TFTP server address

The IP address of the most-recently contacted TFTP server, if the

 

switch has contacted a TFTP server since the last time the software

 

was reloaded or the switch was rebooted.

 

 

Configuration filename

The name under which the switch’s startup-config file was uploaded

 

or downloaded during the most recent TFTP access.

 

 

Image filename

The name of the switch flash image (system software file) that was

 

uploaded or downloaded during the most recent TFTP access.

 

 

6 - 100