Configuring OSPF

For example, to determine an external LSA’s index number, enter the following command:

HP9300> show ip ospf external-link-state

Index Aging LS ID

Router

Seq(hex) Chksum

11332 130.132.81.208 130.130.130.241 80000002 000085ae

21325 130.132.116.192 130.130.130.241 80000002 0000a37d

31330 130.132.88.112 130.130.130.241 80000002 0000fb91

4

1333

130.132.75.48

130.130.130.241

80000002

00000ecc

5

1338

130.132.46.224

130.130.130.241

80000002

000067df

additional entries omitted for brevity...

USING THE WEB MANAGEMENT INTERFACE

You cannot display the contents of an LSA using the Web management interface.

Displaying OSPF Virtual Neighbor Information

To display OSPF virtual neighbor information for the routing switch, use one of the following methods.

USING THE CLI

To display OSPF virtual neighbor information, enter the following command at any CLI level:

HP9300> show ip ospf virtual-neighbor

Syntax: show ip ospf virtual-neighbor [<num>]

The <num> parameter displays the table beginning at the specified entry number.

USING THE WEB MANAGEMENT INTERFACE

1.Log on to the device using a valid user name and password for read-only or read-write access. The System configuration panel is displayed.

2.Click on the plus sign next to Monitor in the tree view to expand the list of monitoring options.

3.Click on the plus sign next to OSPF in the tree view to expand the list of OSPF option links.

4.Click on the Virtual Neighbor link.

Displaying OSPF Virtual Link Information

To display OSPF virtual link information for the routing switch, use one of the following methods.

USING THE CLI

To display OSPF virtual link information, enter the following command at any CLI level:

HP9300> show ip ospf virtual-link

Syntax: show ip ospf virtual-link [<num>]

The <num> parameter displays the table beginning at the specified entry number.

USING THE WEB MANAGEMENT INTERFACE

1.Log on to the device using a valid user name and password for read-only or read-write access. The System configuration panel is displayed.

2.Click on the plus sign next to Monitor in the tree view to expand the list of monitoring options.

3.Click on the plus sign next to OSPF in the tree view to expand the list of OSPF option links.

4.Click on the Virtual Interface link.

8 - 47