Configuring VLANs
Displaying VLAN Information
After you configure the VLANs, you can verify the configuration using the following methods.
Displaying
Use one of the following methods to display VLAN information for all the VLANs configured on the device.
USING THE CLI
Enter the following command at any CLI level. This example shows the display for the IP
HP9300(config)# show vlans
Total
Maximum
legend: [S=Slot]
Untagged Ports: (S4) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Untagged Ports: (S4) 17 18 19 20 21 22 23 24 Tagged Ports: None
Untagged Ports: (S1) 1 2 3 4 5 6
Tagged Ports: None
Name:
Static ports: None
Exclude ports: None
Dynamic ports: (S1) 1 2 3 4 5 6
Untagged Ports: (S2) 1 2 3 4 5 6
Tagged Ports: None
Static ports: None Exclude ports: None
Dynamic ports: (S2) 1 2 3 4 5 6
Syntax: show vlans
USING THE WEB MANAGEMENT INTERFACE
To display VLAN configuration information:
1.Log on to the device using a valid user name and password for
2.Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3.Click on the plus sign next to VLAN in the tree view to expand the list of VLAN option links.
4.Click on the Port link to display the
16 - 57