Configuring IP
Table 6.17: CLI Display of IP Traffic Statistics – routing switch (Continued)
This Field... | Displays... |
|
|
parameter | The number of Parameter Problem messages sent or received by the |
| device. |
|
|
source quench | The number of Source Quench messages sent or received by the |
| device. |
|
|
redirect | The number of Redirect messages sent or received by the device. |
|
|
echo | The number of Echo messages sent or received by the device. |
|
|
echo reply | The number of Echo Reply messages sent or received by the device. |
|
|
timestamp | The number of Timestamp messages sent or received by the device. |
|
|
timestamp reply | The number of Timestamp Reply messages sent or received by the |
| device. |
|
|
addr mask | The number of Address Mask Request messages sent or received by |
| the device. |
|
|
addr mask reply | The number of Address Mask Replies messages sent or received by |
| the device. |
|
|
irdp advertisement | The number of ICMP Router Discovery Protocol (IRDP) |
| Advertisement messages sent or received by the device. |
|
|
irdp solicitation | The number of IRDP Solicitation messages sent or received by the |
| device. |
|
|
UDP statistics |
|
|
|
received | The number of UDP packets received by the device. |
|
|
sent | The number of UDP packets sent by the device. |
|
|
no port | The number of UDP packets dropped because the packet did not |
| contain a valid UDP port number. |
|
|
input errors | This information is used by HP customer support. |
|
|
TCP statistics |
|
The TCP statistics are derived from RFC 793, “Transmission Control Protocol”.
| active opens | The number of TCP connections opened by this device by sending a |
|
|
| TCP SYN to another device. |
|
|
|
|
|
| passive opens | The number of TCP connections opened by this device in response to |
|
|
| connection requests (TCP SYNs) received from other devices. |
|
|
|
|
|
| failed attempts | This information is used by HP customer support. |
|
|
|
|
|
| active resets | The number of TCP connections this device reset by sending a TCP |
|
|
| RESET message to the device at the other end of the connection. |
|
|
|
|
|
| passive resets | The number of TCP connections this device reset because the device |
|
|
| at the other end of the connection sent a TCP RESET message. |
|
|
|
|
|
| input errors | This information is used by HP customer support. |
|
|
|
|
|
| in segments | The number of TCP segments received by the device. |
|
|
|
|
|
|
|
|
|
6 - 95