Configuring IP Multicast Protocols

 

 

 

 

 

This Field...

Displays...

 

 

 

 

 

Candidate-RP-advertisement period

Indicates how frequently the BSR sends candidate RP advertisement

 

 

messages.

 

 

Note: This field appears only if this routing switch is a candidate RP.

 

 

 

 

USING THE WEB MANAGEMENT INTERFACE

You cannot display PIM Sparse information using the Web management interface.

Displaying RP-to-Group Mappings

To display RP-to-group mappings, use the following CLI method.

USING THE CLI

To display RP-to-group-mappings, enter the following command at any CLI level:

HP9300(config-pim-router)# show ip pim rp-map

Group address

RP address

-------------------------------

239.255.162.1

207.95.7.1

Syntax: show ip pim rp-map

This display shows the following information.

 

 

 

This Field...

 

Displays...

 

 

 

Group address

 

Indicates the PIM Sparse multicast group address using the listed RP.

 

 

 

RP address

 

Indicates the IP address of the Rendezvous Point (RP) for the listed

 

 

PIM Sparse group.

 

 

 

USING THE WEB MANAGEMENT INTERFACE

You cannot display PIM Sparse information using the Web management interface.

Displaying RP Information for a PIM Sparse Group

To display RP information for a specific PIM Sparse group, use the following CLI method.

USING THE CLI

To display RP information for a PIM Sparse group, enter the following command at any CLI level:

HP9300(config-pim-router)# show ip pim rp-hash 239.255.162.1

RP: 207.95.7.1, v2

Info source: 207.95.7.1, via bootstrap

Syntax: show ip pim rp-hash <group-addr>

The <group-addr> parameter is the address of a PIM Sparse IP multicast group.

9 - 23