Configuring BGP4
Displaying Route Details
Here is an example of the information displayed when you use the detail option. In this example, the information for one route is shown.
HP9300# show ip bgp routes detail |
|
|
|
|
| ||||
Total number of BGP Routes: 516985 |
|
|
|
|
| ||||
Status A:AGGREGATE B:BEST |
| ||||||||
| H:HISTORY I:IB GP L:LOCAL M:MULTIPATH S:SUPPRESSED |
|
| ||||||
| Network |
| Next Hop |
| Metric | LocPrf | Weight | Origin | |
1 | 0.0.0.0/0 | 192.169.103.1 |
| None | 100 | 0 | IGP | ||
| Atomic | AGGREGATION(ID | AS) | Originator | Cluster List |
| |||
| None | 0.0.0.0 |
| 0 | None | None |
|
| |
| Status | Learned From | Distance | RIB_out Communities |
|
| |||
| B | 192.169.103.1 | 20 | 10 | Internet |
|
| ||
remaining entries not shown...
These displays show the following information.
|
| Table 10.10: BGP4 Network Information |
| |
|
|
|
|
|
| This Field... |
| Displays... |
|
|
|
|
|
|
| Total number of BGP Routes |
| The number of BGP4 routes. |
|
|
|
|
|
|
| Status codes |
| A list of the characters the display uses to indicate the route’s status. |
|
|
|
| The status code is appears in the left column of the display, to the left |
|
|
|
| of each route. The status codes are described in the command’s |
|
|
|
| output. |
|
|
|
|
|
|
| Network |
| The network address. |
|
|
|
|
|
|
| Next Hop |
| The |
|
|
|
|
|
|
| Metric |
| The value of the route’s MED attribute. If the route does not have a |
|
|
|
| metric, this field is blank. |
|
|
|
|
|
|
| LocPrf |
| The degree of preference for this route relative to other routes in the |
|
|
|
| local AS. When the BGP4 algorithm compares routes on the basis of |
|
|
|
| local preferences, the route with the higher local preference is chosen. |
|
|
|
| The preference can have a value from 0 – 4294967295. |
|
|
|
|
|
|
| Weight |
| The value that this router associates with routes from a specific |
|
|
|
| neighbor. For example, if the router receives routes to the same |
|
|
|
| destination from two BGP4 neighbors, the router prefers the route |
|
|
|
| from the neighbor with the larger weight. |
|
|
|
|
|
|
| Origin |
| The source of the route information. The origin can be one of the |
|
|
|
| following: |
|
|
|
| • EGP – The routes with this set of attributes came to BGP through |
|
|
|
| EGP. |
|
|
|
| • IGP – The routes with this set of attributes came to BGP through |
|
|
|
| IGP. |
|
|
|
| • INCOMPLETE – The routes came from an origin other than one |
|
|
|
| of the above. For example, they may have been redistributed |
|
|
|
| from OSPF or RIP. |
|
|
|
| When BGP4 compares multiple routes to a destination to select the |
|
|
|
| best route, IGP is preferred over EGP and both are preferred over |
|
|
|
| INCOMPLETE. |
|
|
|
|
|
|
|
|
|
|
|
10 - 107